XCellarisPRO HC902
XCellarisPRO HC902
The skin is our largest organ covering an area of up to two square metres. With advancing age skin damages increase, however. The XCellarisPRO HC902 can help retain a smoother, fresher and younger looking skin. XCellarisPRO HC902's tiny microneedles remove old skin scales, deposits and blockages of the uppermost skin layer, the epidermis. Your skin complexion will become more refined, radiant and transparent again. Blemishes and enlarged pores can be reduced clearly. With just two to three applications a week, your skin will look softer, fresher and brighter after only a few weeks.
The short microneedles of 0.2 millimetres length penetrate solely the uppermost skin layer (epidermis). Treatment with the XCellarisPRO HC902 is thus virtually painless. This is also due to the very high quality and sharpness of the needles which are produced and controlled under strict quality criteria in Germany. There are no comparable products from the Far East, which by the way are nothing but cheap copies of our Original.
The home use of XCellarisPRO HC902 is also very well suited to support professional microneedling carried out by a dermatologist.
The XCellarisPRO HC902 can be used by the same person several times, since the microneedles only penetrate into the top skin layer. Regular and thorough cleansing after each application is ceaseless for repeated use. Otherwise, a hygienic application can not be ensured, thus leading to skin irritations.
Correct application of the XCellarisPRO HC902 is crucial to obtain good results. Follow these steps and your skin will improve after just the first few applications.
1. Cleaning the skin:
You must thoroughly clean the skin areas to be treated before using the XCellarisPRO HC902, meaning you can prevent the penetration of bacteria in the top layer of the skin. We recommend the XCellarisPRO Deep Cleanser for this purpose.
2. Star-shaped application:
Roll the XCellarisPRO HC902 over the skin areas to be treated using little pressure. In doing so, roll horizontally, vertically and diagonally across the skin. Roll ca. 2-3 times back and forth each way, lifting the device slightly each time before changing the direction.
3. Make sure that you lightly stretch the skin using your fingers in order to best reach smaller wrinkles and hard to reach places.
4. Application of care products:
Allow 10 to 15 minutes to pass so that your skin is able to recover well. Then apply a suitable care product. The XCellarisPRO products with hyaluronic acid are especially suitable. They supply your skin with concentrated hyaluronic acid and plump up your skin from the inside out.
Login
The skin is our largest organ covering an area of up to two square metres. With advancing age skin damages increase, however. The XCellarisPRO HC902 can help retain a smoother, fresher and younger looking skin. XCellarisPRO HC902's tiny microneedles remove old skin scales, deposits and blockages of the uppermost skin layer, the epidermis. Your skin complexion will become more refined, radiant and transparent again. Blemishes and enlarged pores can be reduced clearly. With just two to three applications a week, your skin will look softer, fresher and brighter after only a few weeks.
The short microneedles of 0.2 millimetres length penetrate solely the uppermost skin layer (epidermis). Treatment with the XCellarisPRO HC902 is thus virtually painless. This is also due to the very high quality and sharpness of the needles which are produced and controlled under strict quality criteria in Germany. There are no comparable products from the Far East, which by the way are nothing but cheap copies of our Original.
The home use of XCellarisPRO HC902 is also very well suited to support professional microneedling carried out by a dermatologist.
The XCellarisPRO HC902 can be used by the same person several times, since the microneedles only penetrate into the top skin layer. Regular and thorough cleansing after each application is ceaseless for repeated use. Otherwise, a hygienic application can not be ensured, thus leading to skin irritations.
Correct application of the XCellarisPRO HC902 is crucial to obtain good results. Follow these steps and your skin will improve after just the first few applications.
1. Cleaning the skin:
You must thoroughly clean the skin areas to be treated before using the XCellarisPRO HC902, meaning you can prevent the penetration of bacteria in the top layer of the skin. We recommend the XCellarisPRO Deep Cleanser for this purpose.
2. Star-shaped application:
Roll the XCellarisPRO HC902 over the skin areas to be treated using little pressure. In doing so, roll horizontally, vertically and diagonally across the skin. Roll ca. 2-3 times back and forth each way, lifting the device slightly each time before changing the direction.
3. Make sure that you lightly stretch the skin using your fingers in order to best reach smaller wrinkles and hard to reach places.
4. Application of care products:
Allow 10 to 15 minutes to pass so that your skin is able to recover well. Then apply a suitable care product. The XCellarisPRO products with hyaluronic acid are especially suitable. They supply your skin with concentrated hyaluronic acid and plump up your skin from the inside out.
Login
Accessory Items
Content: 50 ml (€133.80* / 100 ml)
Content: 300 ml (€12.97* / 100 ml)
Content: 7 pieces (€6.41* / 1 pieces)